Connect with us
Flight Booking
Car Rentals
Airport Parking
Hotel Booking
VPN for Streaming
Best VPN


Asus ROG Swift OLED PG48UQ Review



Get Coupons

Asus ROG Swift OLED PG48UQ Review

Asus ROG Swift OLED PG48UQ Review: A Colossal Gaming Marvel



The Asus ROG Swift OLED PG48UQ commands attention with its massive 48-inch 4K OLED panel and an impressive 2.1 speaker system. While the visual and audio experience is top-notch, the sheer size of this gaming monitor demands careful consideration in terms of placement. Despite some drawbacks like the absence of Type-C video input and the stand’s lack of adjustment, the PG48UQ stands as a gaming powerhouse.


Luxurious 4K 138Hz OLED Panel: The monitor boasts a spacious 48-inch OLED display with a stunning 4K resolution, 138Hz refresh rate, and rapid 0.1ms G2G response time.

Excellent 2.1 Speaker System: Featuring a robust 2.1 speaker system with 35W output, the built-in speakers deliver high-quality, rich, and resonant sound.

Good Remote Control: The inclusion of a remote control enhances user convenience for adjusting monitor settings.


No Type-C Video Input: The absence of a Type-C video input might be a limitation for users seeking comprehensive connectivity options.

Stand has Zero Adjustment: The stand lacks adjustment options, limiting flexibility in positioning the monitor according to user preferences.

view on amazon

48″ OLED 4K Gaming Beast:

The PG48UQ showcases a cutting-edge 48-inch OLED display with a 4K 10-bit resolution (3840 x 2160), a remarkable 138Hz refresh rate, and an ultra-fast 0.1ms G2G response time. This gaming monitor redefines the gaming experience with its colossal size, providing an immersive and visually stunning environment for gamers.

The accompanying 2.1 speaker system packs a punch with 35W of output power, delivering high-quality audio. The built-in speakers provide a rich and resonant sound, enhancing the overall gaming and multimedia experience.

However, the sheer size and weight of the PG48UQ (16.2 kg) pose challenges in terms of placement. Potential buyers should carefully consider where to position this gaming giant, as its dimensions (1068 x 686 x 266mm) make it unsuitable for every environment.

Asus ROG Swift OLED PG48UQ Review

Size becomes a focal point in the design philosophy of the Asus ROG Swift OLED PG48UQ, offering a colossal 48-inch display. This gaming monitor, measuring 107 x 61 cm, stands out for its sheer size, presenting both opportunities and challenges in terms of usage.

See also  White Lines on iPhone Screen?

While the PG48UQ may find its sweet spot in console gaming setups, its dimensions make it less suitable for traditional PC gaming scenarios. The monitor’s strengths truly shine when set up at a distance, allowing users to leverage its OLED panel and powerful speaker system for a first-class audiovisual experience.

Design and Features:

The PG48UQ’s dimensions, weighing 16.2 kg, demand careful consideration of placement. Asus acknowledges this by providing an Instagram link for users to visualize the monitor in their environment before making a purchase decision.

Despite its substantial size, the monitor surprises with its thin profile. The panel is a mere 4mm thick, and the chassis, housing electronics, I/O ports, and heatsink, is only 40mm thick. The slim bezels (10mm) contribute to an immersive visual experience, minimizing distractions.

However, the stand’s lack of adjustment options is a notable drawback. The absence of tilt adjustment, in particular, may pose challenges for users who prefer a specific monitor orientation. The inability to tilt the monitor back slightly might be a hindrance to achieving optimal viewing angles.

Connectivity options include two HDMI 2.1, two HDMI 2.0, and one DisplayPort 1.4 for video inputs. For data connectivity, the PG48UQ features a USB-B upstream connector and four USB-A 3.2 Gen 1 downstream ports. While the inclusion of various ports is commendable, the absence of a Type-C port with DP Alternate Mode feels like a missed opportunity, especially considering the monitor’s size and price.

The acoustic system comprises two full-range speakers (10W each) and a 15W woofer, delivering a well-balanced and powerful audio experience. With a measured volume of 82dB(A) and a wide soundscape, the PG48UQ’s audio capabilities complement its visual prowess.

Navigating settings is made convenient through the OSD menus, accessible using a small joystick under the display’s center. Additionally, Asus includes a remote control, enhancing user flexibility by allowing adjustments from a distance.

See also  Best Ergonomic Gaming Chair 2023

Image Quality:

The centerpiece of the PG48UQ is its vibrant 4K OLED panel, visually impressive and immersive. The 10-bit display offers excellent gamut coverage, with 100% sRGB, 95.7% DCI-P3, and 87.7% Adobe RGB. The matte finish on the screen effectively controls reflections, enhancing overall image clarity.

OLED technology’s hallmark absolute blacks, coupled with a peak brightness of 363 nits (in SDR mode), contribute to an essentially infinite contrast ratio, a significant advantage for HDR content. The monitor achieves 885 nits in HDR mode, providing an exceptional HDR viewing experience.

Color accuracy is maintained, with Delta E values well within acceptable limits. The factory calibration report records a Delta E change of 1.71, reflecting impressive out-of-the-box color performance. Users seeking further customization can explore the Color menu, allowing adjustments to color temperature, saturation, six-axis saturation, and gamma.

The refresh rate, set to 120Hz by default, can be increased to 138Hz with acceleration enabled. While not the highest in the gaming monitor category, the PG48UQ’s low 0.1ms response time ensures minimal ghosting or motion blur, complemented by Nvidia G-Sync Compatible certification for tear-free gaming.

While lacking VESA HDR certification, the PG48UQ delivers excellent HDR performance through the HDR10 standard, leveraging the capabilities of its OLED panel.

Gaming Features:

True to its Republic of Gamers branding, the PG48UQ incorporates gaming-centric features in its GamePlus menu. Users benefit from a frame counter, crosshair overlay, sniper mode with various styles, stopwatch, timer, and Shadow Boost settings. These features enhance the gaming experience, offering tools for performance monitoring and optimization.

The Aspect Control feature allows users to force the display into a 24″ or 27″ 16:9 space or a 32″ 21:9 space. While a sea of black surrounds the image, this feature makes the PG48UQ more usable in specific scenarios.

Game Visual menu provides various picture modes, though some may find them intrusive due to significant changes in brightness, gamma, and saturation. An sRGB option is recommended for desktop usage, and users have the option to turn off these modes.

See also  How to recover deleted photos in Android?

As with any OLED technology, screen burn-in is a consideration. Asus addresses this concern by incorporating features like pixel movement and pixel refresh, ensuring durability and minimizing the risk of burn-in issues.

Is it Worth Buying?

The Asus ROG Swift OLED PG48UQ is a compelling choice for gamers seeking a massive OLED gaming monitor. The impressive 4K display, powerful speaker system, and thoughtful features make it a worthy investment for those who crave an immersive gaming experience. However, potential buyers should carefully evaluate the available space and consider alternative models if the colossal size poses challenges.

Final Thoughts:

While the PG48UQ’s sheer size may limit its compatibility with various setups, it stands as a technical masterpiece. The image quality, motion processing, and HDR performance contribute to an exceptional gaming and multimedia experience. The inclusion of gaming features, coupled with the convenience of a remote control, adds value to the overall package.

For users open to the colossal dimensions, the Asus ROG Swift OLED PG48UQ delivers on its promise of a gaming marvel. However, those seeking a more manageable size may explore alternatives like the 42-inch model (ROG Swift OLED PG42UQ) or other options in the market. The PG48UQ’s technical prowess and immersive capabilities make it a standout choice, albeit one that requires careful consideration.

How We Test:

Our comprehensive testing involves using each monitor as the primary display for at least a week. This real-world usage allows us to assess ease of use, performance in everyday tasks, and suitability for various scenarios.

Colorimeter testing is employed to evaluate colors and image quality, ensuring accurate and detailed assessments. Our team also provides expert assessments based on their experience with the monitor. Share your views and thoughts in the comments below regarding Asus ROG Swift OLED PG48UQ Review.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *


How to Clear the RAM on iPhone in seconds





Get Coupons

How to Clear the RAM on iPhone in seconds

A Quick Guide on How to Clear RAM on iPhone in Seconds :


For iPhone users, ensuring optimal performance is paramount to a seamless user experience. One effective way to achieve this is by freeing up space in the Random Access Memory (RAM), where the device temporarily stores data needed for running applications.

When the RAM is cluttered, your iPhone may experience sluggishness, longer loading times, and even unexpected app closures. In this guide, we’ll explore the simple yet powerful method of clearing RAM on your iPhone to enhance its performance in just a few seconds.

Understanding the Importance of Clearing RAM:

Random Access Memory (RAM) is a crucial component that allows your iPhone to quickly access and process data required by active applications. As you use various apps throughout the day, RAM gradually fills up. When it reaches capacity, your device may start to slow down as it struggles to access the necessary data.

Clearing RAM is akin to providing a breath of fresh air to your iPhone, ensuring it can efficiently handle new tasks, resulting in improved speed and responsiveness.

Quick Reset for Different iPhone Models:

The easiest and most effective way to clear RAM on an iPhone involves performing a quick reset. The method varies slightly depending on the type of iPhone model you own. Follow these steps:

For iPhone Models with Face ID (iPhone X and newer):

  • Press and hold the volume down button and the side button simultaneously.
  • When the power off slider appears, drag it to the right to turn off your iPhone.
  • Wait approximately 30 seconds and then turn the device back on.
See also  Best Ergonomic Gaming Chair 2023

For iPhone Models with Touch ID:

  • Press and hold the side button until the slider appears.
  • If you own the first-generation iPhone SE, press the top button instead.
  • Slide to power off and wait for around 30 seconds before turning the device back on.
  • By performing this quick reset, you allow your iPhone to clear out unnecessary data from the RAM, giving it a performance boost.

Additional Tips to Free Up RAM:

While the quick reset is a powerful method, there are other proactive steps you can take to optimize your iPhone’s performance and free up RAM:

Close Unused Applications:

Manually close apps that you’re not actively using, as open apps consume RAM resources.

Manage Notifications:

Turn off notifications for apps that aren’t essential. Unnecessary notifications can contribute to RAM usage.

Stay Updated:

Ensure your iPhone is running the latest version of iOS. Updates often include performance enhancements.

Monitor Storage Space:

Keep an eye on your device’s storage capacity. If it’s near capacity, consider deleting unnecessary files or apps.

Battery and Storage Check:

If your iPhone continues to exhibit slow performance, it may be time to check the battery health or free up additional storage space. Contact Apple support for further assistance.


In just a matter of seconds, you can breathe new life into your iPhone by clearing its RAM. The quick reset method, coupled with proactive measures like closing unused apps and managing notifications, ensures that your device runs smoothly and efficiently.

By understanding the importance of RAM and regularly optimizing its usage, you can enjoy a responsive and high-performing iPhone. Incorporate these simple steps into your routine, and experience the difference in speed and responsiveness on your beloved device.

See also  iPhone Keyboard Tricks and Tips
Continue Reading


How to Share Wifi Password iPhone




wifi internet shopping broadband

Get Coupons

How to Share Wifi Password iPhone

How to Share Wifi Password iPhone? Sharing WiFi Password on iPhone


The convenience of automatically connecting to WiFi at home adds a touch of comfort to our daily lives. Sharing this access with friends and guests is a hospitable gesture, making you the ultimate host.

However, it becomes a challenge when you want to connect someone to your WiFi, and either you don’t know the password or it’s too complex to remember. Fear not – sharing WiFi on iPhone to iPhone is a breeze, and we’ll guide you through the process.

Requirements for WiFi Sharing:

Before delving into the steps, let’s go through the essential requirements to seamlessly share WiFi between iPhones:

Both iPhones Need iOS 16 or iOS 17:

Ensure that both your iPhone and your friend’s iPhone are running the latest version of iOS, either iOS 16 or iOS 17. Staying up-to-date is key to accessing the latest features.

Unlocked and Connected iPhone:

Your iPhone must be unlocked and connected to the WiFi network you intend to share. This ensures a smooth sharing process.

Friend’s Contact Information:

Your friend should be listed as a contact in your address book, and their contact information must include the email associated with their Apple ID. This is crucial for the sharing mechanism to work seamlessly.

WiFi Sharing Steps:

Assuming all the prerequisites are met, follow these straightforward steps to share your WiFi password:

Unlock Your iPhone:

Make sure your iPhone is unlocked and connected to the WiFi network you wish to share.

See also  How to Cancel Netflix Subscription?

Ask Your Friend to Connect:

Request your friend to go to Settings on their iPhone, navigate to the WiFi section, and select the desired network. At this point, their iPhone should prompt them for the WiFi password.

Share Password:

On your iPhone, a prompt will appear to share the WiFi password with your friend. Click on the ‘Share Password’ button. This initiates the sharing process via AirDrop, and your friend’s iPhone will automatically receive the password.

Connection Confirmation:

Once the password is shared, your friend’s iPhone will display a message confirming the connection. Your friend is now successfully connected to the same WiFi network without needing to know the password.

By following these steps, you’ve not only made the connection process seamless but also maintained the confidentiality of your WiFi password.

Alternative Method: Using a QR Code

In case your friend doesn’t use an iPhone or has an older iOS version, an alternative method involves creating a QR code to share your WiFi password. Here’s how:

Prepare a QR Code:

Visit the QiFi website from your iPhone, enter your WiFi network name and password, and click on the ‘Generate’ button. This generates a QR code representing your WiFi credentials.

Display QR Code to Friend:

When your friend needs to connect, show them the QR code on your iPhone. Regardless of their phone type, they can use their camera to scan the QR code. This automatically recognizes the WiFi credentials and connects them without manual password input.


Sharing your WiFi password on iPhone has never been simpler. By keeping both iPhones updated, ensuring the proper settings, and following the steps outlined in this guide, you can effortlessly extend your hospitality to friends and guests.

See also  White Lines on iPhone Screen?

Whether using the direct sharing method or the QR code alternative, the process is user-friendly and secures your WiFi network. Embrace the ease of sharing and enjoy a connected and hospitable environment for everyone.

Continue Reading


How to Improve iPhone Battery Life with iOS 17




How to Put SD Card in iPhone?

Get Coupons

How to Improve iPhone Battery Life with iOS 17

How to Improve iPhone Battery Life :


One of the common grievances among iPhone users revolves around the device’s battery life. Many users find that their iPhones don’t hold a charge as well as other high-end smartphones. While the capacity of the phone’s components may contribute to this issue, there are adjustments and tricks within the iPhone settings that can help extend battery life.

In this detailed guide, we will explore various strategies for improving iPhone battery life, specifically focusing on iOS 17.

Optimizing Screen Features:

One of the prominent features impacting battery life is the always-on screen, particularly on newer devices. To address this, users can disable the always-on screen feature by navigating to Settings, selecting ‘Display and Brightness,’ and deactivating it.

This adjustment can significantly reduce battery drainage, especially for those who don’t find this feature essential.

Managing Screen Brightness:

Another factor affecting battery life is screen brightness. Excessive brightness can lead to faster battery depletion. To address this, ensure that the iPhone’s automatic screen brightness adjustment feature is activated. Users can access this setting by going to ‘Settings,’ selecting ‘Display and Brightness,’ and enabling the ‘Auto-Brightness’ option.

By allowing the phone to adjust brightness based on ambient lighting conditions, users can extend battery life considerably.

Addressing Haptic Feedback:

The haptic feedback of the keyboard, also known as the haptic keyboard, can contribute to unnecessary energy consumption. To conserve energy, users can disable this feature by accessing the iPhone settings. Navigate to ‘Settings,’ choose ‘Sounds and Vibrations,’ then proceed to ‘Keyboard Feedback.’ Here, users can disable the ‘Vibration’ option, minimizing the battery impact of haptic feedback.

See also  Best Ergonomic Gaming Chair 2023

Background App Refresh:

One significant feature that can drain battery life is Background App Refresh. While this feature ensures that apps are updated in the background, it can be a resource-intensive process. Users can manage Background App Refresh by going to ‘Settings,’ selecting ‘General,’ and choosing ‘Background App Refresh.’ Here, users can either disable the feature entirely or customize it for specific apps, optimizing battery performance.

App Notifications:

Constant app notifications can contribute to battery drain. Users can conserve battery life by managing app notifications. Navigate to ‘Settings,’ select ‘Notifications,’ and review and adjust notification settings for each app. Disabling unnecessary notifications can help minimize background activities and preserve battery power.

Location Services:

Location services, while useful, can significantly impact battery life. Users can manage location services by going to ‘Settings,’ selecting ‘Privacy,’ and choosing ‘Location Services.’ Here, users can either disable location services entirely or customize settings for individual apps. Turning off location services for non-essential apps can lead to substantial energy savings.

Updates and Background Activities:

Ensuring that the iPhone is running the latest iOS version is crucial for optimal battery performance. Apple frequently releases updates that include bug fixes and optimizations. Additionally, keeping apps updated can address potential performance issues that may impact battery life. Users can check for updates in ‘Settings’ under the ‘General’ section.

Manage Widgets:

Widgets on the iPhone’s home screen can provide quick access to information but may consume unnecessary power if not managed efficiently. Users can customize and remove widgets by entering ‘Edit Home Screen’ mode. Removing widgets that are not frequently used can contribute to improved battery efficiency.

See also  Best PS4 Controllers 2023

Limit Background Processes:

iOS 17 provides users with the ability to limit the number of background processes running on the device. To manage this, go to ‘Settings,’ select ‘General,’ and choose ‘Background App Management.’ Here, users can set limitations on background processes, ensuring that only essential activities are running when the device is not in use.

Optimize Mail Settings:

Fetching emails frequently can contribute to battery drain. Users can optimize mail settings by going to ‘Settings,’ selecting ‘Mail,’ and choosing ‘Accounts.’ Here, users can adjust the frequency of mail fetching or switch to manual fetching for non-essential accounts, conserving battery power.


Improving iPhone battery life with iOS 17 involves a combination of adjusting settings, managing features, and adopting efficient practices. By following the detailed tips outlined in this guide, users can optimize their iPhone’s battery performance and enjoy extended usage between charges.

Whether it’s fine-tuning screen settings, managing app activities, or staying up-to-date with software updates, these strategies empower users to make the most out of their iPhone’s battery life. Incorporate these practices into your routine, and experience a more efficient and long-lasting iPhone battery performance with iOS 17.

Continue Reading

Car Rental


Cheap Flights & Hotel Booking