Flight Booking

Car Rentals

Airport Parking

Hotel Booking

VPN for Streaming

Best VPN

Technology

VyprVPN Review

Published

4 months ago

January 24, 2024

admin

Get Coupons

VyprVPN Review

VyprVPN Review Summary :

VyprVPN is a player that takes security and anonymity very seriously. The company is strategically located in Switzerland, which is a well-known privacy bastion in Europe.

With the slogan “Your data. Our servers. No third parties” shows VyprVPN’s dedication to users’ security by keeping the entire server park in-house. VyprVPN uses extensive encryption and has obfuscation technology that makes it optimal for bypassing censorship.

Our VyprVPN test also shows that the company has strict no-log policies and shows no signs of leaks related to IP and DNS data.

In terms of speed, however, the company still has some way to go. The speed was sufficient to download files quickly and stream in HD.

VyprVPN

Recommendation

VyprVPN is a versatile and efficient VPN solution well suited for both streaming and increased online security.

As a basis for our VyprVPN review, we have subjected the service to extensive testing and measured this against the performance of similar players. Here we have looked at points such as speed, availability and security. For a VPN to be optimal, it should offer high security at a speed that does not make the VPN solution noticeable.

The service meets high standards for both security and availability , and is one of very few players that owns its entire server network itself.

On the other hand, our VyprVPN experiences have shown that they are slightly behind similar players when it comes to speed. They certainly offer high enough speed for streaming and work, but the speed achieved does not quite reach what other players offer their customers. This therefore pulls VyprVPN down somewhat compared to its peers

VyprVPN speed and locations

With a superior offering of 300,000+ IP addresses, VyprVPN has one of the most comprehensive offerings we’ve seen to date. These are distributed over 700 different servers in 64 different countries. The range of locations is good and the company has an even distribution across North America, Europe, Asia and the Middle East.

This means that the vast majority of users will find a location near them so that optimal speed can be achieved. The truly unique thing about VyprVPN’s network of servers is that they do not use any third-party actors. The company owns all the servers itself and can thus ensure high security and up-to-date hardware.

In terms of speed, we noticed a reduction in speed of about 16% when we connected our VyprVPN Test. This is a relatively large drop in speed, but on a 100 mbps line there is still sufficient speed left. The most stable speed we achieved was 77.2 mbps.

The advantage is that this speed remained very stable and we only experienced marginal drops from this speed. On long-distance connections, however, we experienced very low speeds in some areas. Most were still above 50 mbps in speed, but compared to other premium players in the industry this is a low speed.

VyprVPN Logging policy and ownership

VyprVPN is a subsidiary of Golden Frog GmbH which is again under the Powerhouse Management umbrella. The company belongs to the married couple Ron and Carolyn Yokubaitis, who since 1994 have been developing solutions for IT security.

The purpose behind VyprVPN was to remove as many third-party providers as possible and thus achieve optimal security for users. This has meant that the company is asking for extensive trust from its users, but they have so far returned an excellent product.

When it comes to logging policy, our VyprVPN test shows that the company is one of the few players with an absolute no-log policy.

A review of the company’s terms of use shows that they do not collect any kind of data from their users, neither the original IP nor the one assigned through the VPN service. They also do not collect information about connections, internet speed, traffic or communication between servers.

By having very open policies, the company has made it virtually impossible for third-party companies to collect data when you use VyprVPN. The company previously had somewhat more unclear guidelines, but these have since been updated and we now have full confidence that the company stands behind its guidelines.

Security and Privacy

In terms of security, the company meets all the requirements that can be demanded of a premium VPN operator. Our VyprVPN review shows that the company uses, among other things, IKEv2, OpenVPN, L2TP, Proprietary and WireGuard protocols.

On encryption, they use the gold standard of the industry with AES-256 bit encryption. They have also included a number of smart functionalities for increased security such as DNS Leak Blocking, First-party DNS, TCP Port 443 support and an integrated VPN Kill Switch. You can also choose to use split tunneling to further increase your security on several of the servers.

Privacy is a high priority at VyprVPN. The company has very detailed user terms and plays completely openly with its point of view on users’ privacy. This means that we have a high level of trust in the company and that they protect the end users in a reassuring way. The company’s Chameleon protocol has meant that the service has quickly become popular in highly censored countries where privacy is otherwise very vulnerable.

Among other things, the solution works well in the UAE, Turkey, Thailand, Saudi Arabia, Russia, Syria and China. However, it is worth noting that the platform has recently had some connection problems in China.

Security Features

DNS Leak Blocking
First-party DNS
Supports TCP Port 443
VPN Kill Switch

VyprVPN Streaming Services

In the beginning, our VyprVPN experiences with streaming were far from optimal. However, this seems to have improved in the latest version of the service where it now offers access to a wide range of streaming services.

How much does VyprVPN cost?

On pricing, VyprVPN is rarely among the cheapest options. They offer three different payment packages with monthly, annual and a three-year plan. The longest plan is without a doubt the cheapest option and there you can achieve up to 87% discount compared to the monthly price.

The disadvantage is that you have to pay the full amount in advance, but if you are looking for a good VPN service and will use it for a long time, it will be worth the investment for most people. We have also noticed that the price in British pounds and US dollars is exactly the same. This means you should connect to a US server and pay in USD rather than GBP to get the cheapest option.

When it comes to payment options, you can use credit cards, PayPal and UnionPay at VyprVPN. The company also has a 30-day money-back guarantee, which means that you can get your money back without question if you are not completely satisfied with the service. They currently do not allow cryptocurrency, but as more and more competitors accept this as payment, we expect that VyprVPN will also eventually open up to this.

VyprVPN Ease of use

There is no doubt that ease of use has been a priority when developing VyprVPN. The application is very clear and easy to navigate around. You can quickly and easily select the desired location or choose the fastest connection available.

Something that makes VyprVPN an excellent fit for both new and experienced users is that they illustrate all their advanced settings in a simple and clear way. They also have a consistent design that means that once you have familiarized yourself with the application on one of the platforms, you will be able to quickly and easily navigate through all the corresponding apps.

VyprVPN Ease of use on different devices

You can use VyprVPN on the vast majority of standard platforms including Windows, Mac, iOS and Android. They allow up to five connections at the same time, which will be sufficient for the vast majority of people. Our VyprVPN experiences show that the applications are very consistent on all platforms.

VyprVPN is therefore well suited for both Mac and Windows, without losing important functionalities. This is something that a number of other players struggle with and makes VyprVPN therefore an excellent choice regardless of which operating system you use, or if you want to have it installed on several different devices at the same time.

They have a consistent design that is the same on all platforms, which means that it both feels and works in an almost identical way. This means that you can easily configure the service according to your own wishes and achieve the results you need.

They also offer a separate application that can be installed on your network router. The only thing we miss from VyprVPN is browser extensions. The company does not offer extensions for browsers, something that almost all similar players have managed to develop.

Customer service at VyprVPN

When we had to test customer service, our VyprVPN experiences show that live chat is absolutely the easiest option to get help. The company also has a library of guidance and e-mail correspondence, but we found that the guidance was lacking.

There was not as extensive access to information as a number of other actors have and it took a while to get a response via e-mail. When we tried to connect to the live chat function it took a few minutes before we got in touch with someone, but in return they were knowledgeable and helpful.

All-in-all, customer service is adequate, but we would have liked to see them significantly expand the library of self-help articles to compete with competitors. This would save both users and customer service from a number of problems and possibly also shorten the waiting time.

A plus is the very detailed installation videos that the company has. Here you get comprehensive guidance on how to get started with the service and get the most out of it.

Why Choose VyprVPN

We can safely recommend VyprVPN to users looking for increased internet security and privacy. This does not mean that the service is without faults, but it hits well at what it delivers.

As we have previously mentioned in our VyprVPN review, Golden Frog has developed extensive security and the technology behind the Chameleon protocol makes the service attractive. Something we still lack are extensions to browsers such as Chrome and Firefox, which all premium players should be able to offer.

VyprVPN also has potential for improvement in terms of speed where they do not quite reach equivalent VPN solutions and price levels . Having said this, VyprVPN is still a very good VPN service and will provide high security for the vast majority of purposes. For an end user who values security and privacy, it will therefore be a good choice.

Technology

How to Clear the RAM on iPhone in seconds

Published

3 months ago

February 16, 2024

admin

Get Coupons

How to Clear the RAM on iPhone in seconds

A Quick Guide on How to Clear RAM on iPhone in Seconds :

For iPhone users, ensuring optimal performance is paramount to a seamless user experience. One effective way to achieve this is by freeing up space in the Random Access Memory (RAM), where the device temporarily stores data needed for running applications.

When the RAM is cluttered, your iPhone may experience sluggishness, longer loading times, and even unexpected app closures. In this guide, we’ll explore the simple yet powerful method of clearing RAM on your iPhone to enhance its performance in just a few seconds.

Understanding the Importance of Clearing RAM:

Random Access Memory (RAM) is a crucial component that allows your iPhone to quickly access and process data required by active applications. As you use various apps throughout the day, RAM gradually fills up. When it reaches capacity, your device may start to slow down as it struggles to access the necessary data.

Clearing RAM is akin to providing a breath of fresh air to your iPhone, ensuring it can efficiently handle new tasks, resulting in improved speed and responsiveness.

Quick Reset for Different iPhone Models:

The easiest and most effective way to clear RAM on an iPhone involves performing a quick reset. The method varies slightly depending on the type of iPhone model you own. Follow these steps:

For iPhone Models with Face ID (iPhone X and newer):

Press and hold the volume down button and the side button simultaneously.
When the power off slider appears, drag it to the right to turn off your iPhone.
Wait approximately 30 seconds and then turn the device back on.

For iPhone Models with Touch ID:

Press and hold the side button until the slider appears.
If you own the first-generation iPhone SE, press the top button instead.
Slide to power off and wait for around 30 seconds before turning the device back on.
By performing this quick reset, you allow your iPhone to clear out unnecessary data from the RAM, giving it a performance boost.

Additional Tips to Free Up RAM:

While the quick reset is a powerful method, there are other proactive steps you can take to optimize your iPhone’s performance and free up RAM:

Close Unused Applications:

Manually close apps that you’re not actively using, as open apps consume RAM resources.

Manage Notifications:

Turn off notifications for apps that aren’t essential. Unnecessary notifications can contribute to RAM usage.

Stay Updated:

Ensure your iPhone is running the latest version of iOS. Updates often include performance enhancements.

Monitor Storage Space:

Keep an eye on your device’s storage capacity. If it’s near capacity, consider deleting unnecessary files or apps.

Battery and Storage Check:

If your iPhone continues to exhibit slow performance, it may be time to check the battery health or free up additional storage space. Contact Apple support for further assistance.

Conclusion:

In just a matter of seconds, you can breathe new life into your iPhone by clearing its RAM. The quick reset method, coupled with proactive measures like closing unused apps and managing notifications, ensures that your device runs smoothly and efficiently.

By understanding the importance of RAM and regularly optimizing its usage, you can enjoy a responsive and high-performing iPhone. Incorporate these simple steps into your routine, and experience the difference in speed and responsiveness on your beloved device.

Technology

How to Share Wifi Password iPhone

Published

3 months ago

February 16, 2024

admin

Get Coupons

How to Share Wifi Password iPhone

How to Share Wifi Password iPhone? Sharing WiFi Password on iPhone

The convenience of automatically connecting to WiFi at home adds a touch of comfort to our daily lives. Sharing this access with friends and guests is a hospitable gesture, making you the ultimate host.

However, it becomes a challenge when you want to connect someone to your WiFi, and either you don’t know the password or it’s too complex to remember. Fear not – sharing WiFi on iPhone to iPhone is a breeze, and we’ll guide you through the process.

Requirements for WiFi Sharing:

Before delving into the steps, let’s go through the essential requirements to seamlessly share WiFi between iPhones:

Both iPhones Need iOS 16 or iOS 17:

Ensure that both your iPhone and your friend’s iPhone are running the latest version of iOS, either iOS 16 or iOS 17. Staying up-to-date is key to accessing the latest features.

Unlocked and Connected iPhone:

Your iPhone must be unlocked and connected to the WiFi network you intend to share. This ensures a smooth sharing process.

Friend’s Contact Information:

Your friend should be listed as a contact in your address book, and their contact information must include the email associated with their Apple ID. This is crucial for the sharing mechanism to work seamlessly.

WiFi Sharing Steps:

Assuming all the prerequisites are met, follow these straightforward steps to share your WiFi password:

Unlock Your iPhone:

Make sure your iPhone is unlocked and connected to the WiFi network you wish to share.

Ask Your Friend to Connect:

Request your friend to go to Settings on their iPhone, navigate to the WiFi section, and select the desired network. At this point, their iPhone should prompt them for the WiFi password.

Share Password:

On your iPhone, a prompt will appear to share the WiFi password with your friend. Click on the ‘Share Password’ button. This initiates the sharing process via AirDrop, and your friend’s iPhone will automatically receive the password.

Connection Confirmation:

Once the password is shared, your friend’s iPhone will display a message confirming the connection. Your friend is now successfully connected to the same WiFi network without needing to know the password.

By following these steps, you’ve not only made the connection process seamless but also maintained the confidentiality of your WiFi password.

Alternative Method: Using a QR Code

In case your friend doesn’t use an iPhone or has an older iOS version, an alternative method involves creating a QR code to share your WiFi password. Here’s how:

Prepare a QR Code:

Visit the QiFi website from your iPhone, enter your WiFi network name and password, and click on the ‘Generate’ button. This generates a QR code representing your WiFi credentials.

Display QR Code to Friend:

When your friend needs to connect, show them the QR code on your iPhone. Regardless of their phone type, they can use their camera to scan the QR code. This automatically recognizes the WiFi credentials and connects them without manual password input.

Conclusion:

Sharing your WiFi password on iPhone has never been simpler. By keeping both iPhones updated, ensuring the proper settings, and following the steps outlined in this guide, you can effortlessly extend your hospitality to friends and guests.

Whether using the direct sharing method or the QR code alternative, the process is user-friendly and secures your WiFi network. Embrace the ease of sharing and enjoy a connected and hospitable environment for everyone.

Technology

How to Improve iPhone Battery Life with iOS 17

Published

3 months ago

February 16, 2024

admin

Get Coupons

How to Improve iPhone Battery Life with iOS 17

How to Improve iPhone Battery Life :

One of the common grievances among iPhone users revolves around the device’s battery life. Many users find that their iPhones don’t hold a charge as well as other high-end smartphones. While the capacity of the phone’s components may contribute to this issue, there are adjustments and tricks within the iPhone settings that can help extend battery life.

In this detailed guide, we will explore various strategies for improving iPhone battery life, specifically focusing on iOS 17.

Optimizing Screen Features:

One of the prominent features impacting battery life is the always-on screen, particularly on newer devices. To address this, users can disable the always-on screen feature by navigating to Settings, selecting ‘Display and Brightness,’ and deactivating it.

This adjustment can significantly reduce battery drainage, especially for those who don’t find this feature essential.

Managing Screen Brightness:

Another factor affecting battery life is screen brightness. Excessive brightness can lead to faster battery depletion. To address this, ensure that the iPhone’s automatic screen brightness adjustment feature is activated. Users can access this setting by going to ‘Settings,’ selecting ‘Display and Brightness,’ and enabling the ‘Auto-Brightness’ option.

By allowing the phone to adjust brightness based on ambient lighting conditions, users can extend battery life considerably.

Addressing Haptic Feedback:

The haptic feedback of the keyboard, also known as the haptic keyboard, can contribute to unnecessary energy consumption. To conserve energy, users can disable this feature by accessing the iPhone settings. Navigate to ‘Settings,’ choose ‘Sounds and Vibrations,’ then proceed to ‘Keyboard Feedback.’ Here, users can disable the ‘Vibration’ option, minimizing the battery impact of haptic feedback.

Background App Refresh:

One significant feature that can drain battery life is Background App Refresh. While this feature ensures that apps are updated in the background, it can be a resource-intensive process. Users can manage Background App Refresh by going to ‘Settings,’ selecting ‘General,’ and choosing ‘Background App Refresh.’ Here, users can either disable the feature entirely or customize it for specific apps, optimizing battery performance.

App Notifications:

Constant app notifications can contribute to battery drain. Users can conserve battery life by managing app notifications. Navigate to ‘Settings,’ select ‘Notifications,’ and review and adjust notification settings for each app. Disabling unnecessary notifications can help minimize background activities and preserve battery power.

Location Services:

Location services, while useful, can significantly impact battery life. Users can manage location services by going to ‘Settings,’ selecting ‘Privacy,’ and choosing ‘Location Services.’ Here, users can either disable location services entirely or customize settings for individual apps. Turning off location services for non-essential apps can lead to substantial energy savings.

Updates and Background Activities:

Ensuring that the iPhone is running the latest iOS version is crucial for optimal battery performance. Apple frequently releases updates that include bug fixes and optimizations. Additionally, keeping apps updated can address potential performance issues that may impact battery life. Users can check for updates in ‘Settings’ under the ‘General’ section.

Manage Widgets:

Widgets on the iPhone’s home screen can provide quick access to information but may consume unnecessary power if not managed efficiently. Users can customize and remove widgets by entering ‘Edit Home Screen’ mode. Removing widgets that are not frequently used can contribute to improved battery efficiency.

Limit Background Processes:

iOS 17 provides users with the ability to limit the number of background processes running on the device. To manage this, go to ‘Settings,’ select ‘General,’ and choose ‘Background App Management.’ Here, users can set limitations on background processes, ensuring that only essential activities are running when the device is not in use.

Optimize Mail Settings:

Fetching emails frequently can contribute to battery drain. Users can optimize mail settings by going to ‘Settings,’ selecting ‘Mail,’ and choosing ‘Accounts.’ Here, users can adjust the frequency of mail fetching or switch to manual fetching for non-essential accounts, conserving battery power.

Conclusion:

Improving iPhone battery life with iOS 17 involves a combination of adjusting settings, managing features, and adopting efficient practices. By following the detailed tips outlined in this guide, users can optimize their iPhone’s battery performance and enjoy extended usage between charges.

Whether it’s fine-tuning screen settings, managing app activities, or staying up-to-date with software updates, these strategies empower users to make the most out of their iPhone’s battery life. Incorporate these practices into your routine, and experience a more efficient and long-lasting iPhone battery performance with iOS 17.